Skip to main content

Results from Fabbing Exercise

One of the exercises our students had to elaborate last semester, was an introduction to Fabbing, in collaboration with our local and new Fab-Lab (http://www.fablab-leuven.be).

They had to design a module inside a placeholder rack, made in plexi. Each student had a cube of 75x75x75mm in which they had to design a trajectory for a 30mm marble (in theory) that was able to pass. Different places had different connections, but they were combinations of an L and T-shape. Not all the places have been filled in (yet?).

They had to combine two techniques, chosen from 3D Printing, Lasercutting, Milling and 3D Scanning. We sponsored a small amount of money to cover a part of the 3D printing cost, so each student could, with some caution, work cheap or even free.

Info on the assignment and exercise (in Dutch):

Here is the resulting sculpture/closet/rack/whatever as it is sitting in our labroom.


Nice things they learned:
  • collaboration : on the connection of boxes, they could with some communication with their neighbors agree on partial passage.
  • feedback : making a model from a digital file presents several chances of feedback on your design (e.g. tolerances, material and technology limitations)
  • free form : since almost all of the architectural projects being designed in our school are quite orthogonal, it was refreshing to be able to diverge from flat faces and straight corners.
  • materiality : fabbing comes at a cost and this dimension is highly important in real life. Having to make adjustments to tweak the budget is a good skill to have as an architect.
Labels:

Comments

Post a Comment

Popular posts from this blog

Improve usage of BIM during early design phases

When I was collecting ideas for a book chapter on BIM (that seemed to never have emerged after that), I collected 10 ideas, which I believe still reflect good recommendations to improve the usage of BIM during the early design phases. These ideas are related to BIM software, but you can apply them in any flavor, as long as you can model with Building Elements, Spaces and have control over representation. Introduction This article gives an overview of several recommendations and tips, to better apply BIM applications and BIM methodologies, in the context of the early design phases. Many of these tips are applicable in any BIM application and they are based on experience gathered from teaching, researching and using BIM software. Sometimes they could help software developers to improve the workflow of their particular BIM implementation. Tip 1 : Gradually increase the amount of information In the early design phases, the architect makes assumptions and lays out the main design in
2 comments
Read more

Getting BIM data into Unity (Part 9 - using IfcConvert)

This is part 9 of a series of posts about getting BIM data into Unity. In this post, we’ll discuss the IfcConvert utility from the IfcOpenShell Open Source IFC Library to preprocess an IFC model for integration with Unity. This is (finally?) again a coding post, with some scripts which are shared to build upon. Conversion of IFC into Unity-friendly formats The strategy with this approach is that you preprocess the IFC-file into more manageable formats for Unity integration. Most Web-platforms do some sort of pre-processing anyway, so what you see in your browsers is almost never an IFC-file, but an optimised Mesh-based geometric representation. However, it wouldn’t be BIM-related if we’d limit ourselves to the geometry, so we will parse the model information as well, albeit using another, pre-processed file. IFC to Wavefront OBJ I used a test IFC-model and used the IfcConvert-utility converted it into OBJ en XML formats. The default way to use it is very simple:
Post a Comment
Read more

Getting BIM data into Unity (Part 8 - Strategies to tackle IFC)

This is part 8 of a series of posts about getting BIM data into Unity. In this post, we’ll discuss IFC as a transfer format towards Unity. As with the previous post, this is not a coding post, although hints and examples are provided. Open BIM and IFC Everybody who ever met me or heard me present on a conference or BIM-lecture will not be surprised to hear that I’m a strong believer in the Industry Foundation Classes (IFC), an open standard, with already two versions published as an ISO standard, being IFC2x2 and IFC4 (but surprisingly not IFC2x3 which is widely used). In the ideal world, this would be the format to use to transfer BIM data into another environment, such as Unity. So what are our options? Looking in the Unity Asset Store Assimp is a library which supports multiple formats, including IFC. https://assetstore.unity.com/packages/tools/modeling/trilib-unity-model-loader-package-91777   I did a few attempts, but alas without any success. It is possib
Post a Comment
Read more