Skip to main content

CREO : new vision for MCAD?

While I don't often discuss Mechanical CAD (MCAD) software, as I'm mostly focusing on Architectural CAD, I want to share the link to CREO and the discussion/description about it on Deelip.com.

PTC owns Pro/Engineer and CoCreate (among others). Pro/Engineer once took the CAD world by force, by introducing several key concepts for CAD that are now common among the major players (e.g. feature based parametric modeling). And with the acquisition of CoCreate, they also had a direct-modeling approach available. If you have difficulties to understand the difference between feature-based and direct modeling, read my older post about it. What they now claim is a new vision that is as revolutionary as was the introduction of Pro/Engineer at the time. In short:

  • they have a more modular approach to everything:
    • choose your modeling concept (2D, 3D direct, 3D Parametric)
    • a rendering module if you need one
    • simulation module
    • ...
  • The former separate products do not exist anymore, they are all modules of the same creo-system
  • They claim to support ANY modeling approach, with ANY CAD data
While this might not shake the Architectural CAD world today, it is no secret that what is getting so much attention today in CAAD (Grasshopper, Generative Components, Revit, amongst others) is closely tied to the approaches in MCAD software. In fact, much of what we now see as "new" in CAAD was in MCAD for some time.
Labels:

Comments

  1. Anonymous29 October, 2010

    So based on the presentation, it appears that what your now getting from PTC is the same products they had before, with a more common UI, different names, and the ability to share data between them. A lot of lightning, but no thunder.

    ReplyDelete

Post a Comment

Popular posts from this blog

Improve usage of BIM during early design phases

When I was collecting ideas for a book chapter on BIM (that seemed to never have emerged after that), I collected 10 ideas, which I believe still reflect good recommendations to improve the usage of BIM during the early design phases. These ideas are related to BIM software, but you can apply them in any flavor, as long as you can model with Building Elements, Spaces and have control over representation. Introduction This article gives an overview of several recommendations and tips, to better apply BIM applications and BIM methodologies, in the context of the early design phases. Many of these tips are applicable in any BIM application and they are based on experience gathered from teaching, researching and using BIM software. Sometimes they could help software developers to improve the workflow of their particular BIM implementation. Tip 1 : Gradually increase the amount of information In the early design phases, the architect makes assumptions and lays out the main design in
2 comments
Read more

Getting BIM data into Unity (Part 9 - using IfcConvert)

This is part 9 of a series of posts about getting BIM data into Unity. In this post, we’ll discuss the IfcConvert utility from the IfcOpenShell Open Source IFC Library to preprocess an IFC model for integration with Unity. This is (finally?) again a coding post, with some scripts which are shared to build upon. Conversion of IFC into Unity-friendly formats The strategy with this approach is that you preprocess the IFC-file into more manageable formats for Unity integration. Most Web-platforms do some sort of pre-processing anyway, so what you see in your browsers is almost never an IFC-file, but an optimised Mesh-based geometric representation. However, it wouldn’t be BIM-related if we’d limit ourselves to the geometry, so we will parse the model information as well, albeit using another, pre-processed file. IFC to Wavefront OBJ I used a test IFC-model and used the IfcConvert-utility converted it into OBJ en XML formats. The default way to use it is very simple:
Post a Comment
Read more

Getting BIM data into Unity (Part 8 - Strategies to tackle IFC)

This is part 8 of a series of posts about getting BIM data into Unity. In this post, we’ll discuss IFC as a transfer format towards Unity. As with the previous post, this is not a coding post, although hints and examples are provided. Open BIM and IFC Everybody who ever met me or heard me present on a conference or BIM-lecture will not be surprised to hear that I’m a strong believer in the Industry Foundation Classes (IFC), an open standard, with already two versions published as an ISO standard, being IFC2x2 and IFC4 (but surprisingly not IFC2x3 which is widely used). In the ideal world, this would be the format to use to transfer BIM data into another environment, such as Unity. So what are our options? Looking in the Unity Asset Store Assimp is a library which supports multiple formats, including IFC. https://assetstore.unity.com/packages/tools/modeling/trilib-unity-model-loader-package-91777   I did a few attempts, but alas without any success. It is possib
Post a Comment
Read more